Raspberry install problems

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Raspberry install problems

Steen Pedersen
Hi

I would like to use Voyage on my Raspberry 2. However, I can't get the install script to work.
I'm using an Debian 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux system.

When I start the mubox-install script I get this output. And nothing is written to the SD-card.

Please help

Steen


root@debian-dell:/home/sbp# /home/sbp/Downloads/install-mubox-rpi.sh /dev/mmcblk0
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000791931 s, 647 kB/s
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xf6f14b8d.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): Building a new DOS disklabel with disk identifier 0x7333616f.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): Partition number (1-4, default 1): First sector (2048-15605759, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-15605759, default 15605759): 
Command (m for help): Selected partition 1
Hex code (type L to list codes): Changed system type of partition 1 to c (W95 FAT32 (LBA))

Command (m for help): Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): Partition number (1-4, default 2): First sector (133120-15605759, default 133120): Using default value 133120
Last sector, +sectors or +size{K,M,G} (133120-15605759, default 15605759): Using default value 15605759

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)

WARNING: If you have created or modified any DOS 6.x
partitions, please see the fdisk manual page for additional
information.
Syncing disks.
mkfs.vfat 3.0.13 (30 Jun 2012)
/dev/mmcblk01: No such file or directory
mke2fs 1.42.5 (29-Jul-2012)
Could not stat /dev/mmcblk02 --- No such file or directory

The device apparently does not exist; did you specify it correctly?
tune2fs 1.42.5 (29-Jul-2012)
tune2fs: No such file or directory while trying to open /dev/mmcblk02
Couldn't find valid filesystem superblock.

Disk /dev/mmcblk0: 7990 MB, 7990149120 bytes
4 heads, 16 sectors/track, 243840 cylinders, total 15605760 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7333616f

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            2048      133119       65536    c  W95 FAT32 (LBA)
/dev/mmcblk0p2          133120    15605759     7736320   83  Linux
mount: special device /dev/mmcblk02 does not exist
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 42.1M  100 42.1M    0     0   176k      0  0:04:04  0:04:04 --:--:--  146k
umount: /tmp/cf: not mounted
mount: special device /dev/mmcblk02 does not exist
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100   168    0   168    0     0    277      0 --:--:-- --:--:-- --:--:--   379
100 46.2M  100 46.2M    0     0  83318      0  0:09:41  0:09:41 --:--:-- 90095
umount: /tmp/cf: not mounted
mount: special device /dev/mmcblk01 does not exist
mount: special device /dev/mmcblk02 does not exist
 *** depmod 3.18.13-v7+
 *** depmod 3.18.13+
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  9823  100  9823    0     0   3661      0  0:00:02  0:00:02 --:--:-- 20989
mkdir: cannot create directory `/tmp/cf/boot.bak': File exists
mv: cannot move `/tmp/cf/boot/modules' to `/tmp/cf/boot.bak/modules': Directory not empty
mv: cannot move `/tmp/cf/boot/overlays' to `/tmp/cf/boot.bak/overlays': Directory not empty
mv: cannot move `/tmp/cf/boot/vc' to `/tmp/cf/boot.bak/vc': Directory not empty
umount: /tmp/cf1: not mounted
umount: /tmp/cf: not mounted

Voyage MuBox for RaspBerry Pi installed!
root@debian-dell:/home/sbp# 

_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Raspberry install problems

Kim-man 'Punky' TSE-2
Hi Steen,

Oh, the script does not support mmc device name (e.g. mmcblk0). You need to modify the script to add "p" in between,
i.e. mmcblk0p1, device and partition.

Sorry on that.  And I welcome patch on this ;-).

Regards,
Punky

On 5/18/2015 9:18 PM, Steen Pedersen wrote:

> Hi
>
> I would like to use Voyage on my Raspberry 2. However, I can't get the install script to work.
> I'm using an Debian 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux system.
>
> When I start the mubox-install script I get this output. And nothing is written to the SD-card.
>
> Please help
>
> Steen
>
>
> root@debian-dell:/home/sbp# /home/sbp/Downloads/install-mubox-rpi.sh /dev/mmcblk0
> 1+0 records in
> 1+0 records out
> 512 bytes (512 B) copied, 0.000791931 s, 647 kB/s
> Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
> Building a new DOS disklabel with disk identifier 0xf6f14b8d.
> Changes will remain in memory only, until you decide to write them.
> After that, of course, the previous content won't be recoverable.
>
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
>
> Command (m for help): Building a new DOS disklabel with disk identifier 0x7333616f.
> Changes will remain in memory only, until you decide to write them.
> After that, of course, the previous content won't be recoverable.
>
> Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
>
> Command (m for help): Partition type:
>    p   primary (0 primary, 0 extended, 4 free)
>    e   extended
> Select (default p): Partition number (1-4, default 1): First sector (2048-15605759, default 2048): Using default value
> 2048
> Last sector, +sectors or +size{K,M,G} (2048-15605759, default 15605759):
> Command (m for help): Selected partition 1
> Hex code (type L to list codes): Changed system type of partition 1 to c (W95 FAT32 (LBA))
>
> Command (m for help): Partition type:
>    p   primary (1 primary, 0 extended, 3 free)
>    e   extended
> Select (default p): Partition number (1-4, default 2): First sector (133120-15605759, default 133120): Using default
> value 133120
> Last sector, +sectors or +size{K,M,G} (133120-15605759, default 15605759): Using default value 15605759
>
> Command (m for help): The partition table has been altered!
>
> Calling ioctl() to re-read partition table.
>
> WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
> The kernel still uses the old table. The new table will be used at
> the next reboot or after you run partprobe(8) or kpartx(8)
>
> WARNING: If you have created or modified any DOS 6.x
> partitions, please see the fdisk manual page for additional
> information.
> Syncing disks.
> mkfs.vfat 3.0.13 (30 Jun 2012)
> /dev/mmcblk01: No such file or directory
> mke2fs 1.42.5 (29-Jul-2012)
> Could not stat /dev/mmcblk02 --- No such file or directory
>
> The device apparently does not exist; did you specify it correctly?
> tune2fs 1.42.5 (29-Jul-2012)
> tune2fs: No such file or directory while trying to open /dev/mmcblk02
> Couldn't find valid filesystem superblock.
>
> Disk /dev/mmcblk0: 7990 MB, 7990149120 bytes
> 4 heads, 16 sectors/track, 243840 cylinders, total 15605760 sectors
> Units = sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x7333616f
>
>         Device Boot      Start         End      Blocks Id  System
> /dev/mmcblk0p1            2048      133119       65536  c  W95 FAT32 (LBA)
> /dev/mmcblk0p2          133120    15605759     7736320 83  Linux
> mount: special device /dev/mmcblk02 does not exist
>   % Total    % Received % Xferd  Average Speed   Time  Time     Time  Current
>                                  Dload  Upload   Total Spent    Left  Speed
> 100 42.1M  100 42.1M    0     0   176k      0  0:04:04  0:04:04 --:--:--  146k
> umount: /tmp/cf: not mounted
> mount: special device /dev/mmcblk02 does not exist
>   % Total    % Received % Xferd  Average Speed   Time  Time     Time  Current
>                                  Dload  Upload   Total Spent    Left  Speed
> 100   168    0   168    0     0    277      0 --:--:-- --:--:-- --:--:--   379
> 100 46.2M  100 46.2M    0     0  83318      0  0:09:41  0:09:41 --:--:-- 90095
> umount: /tmp/cf: not mounted
> mount: special device /dev/mmcblk01 does not exist
> mount: special device /dev/mmcblk02 does not exist
>  *** depmod 3.18.13-v7+
>  *** depmod 3.18.13+
>   % Total    % Received % Xferd  Average Speed   Time  Time     Time  Current
>                                  Dload  Upload   Total Spent    Left  Speed
>   0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
> 100  9823  100  9823    0     0   3661      0  0:00:02  0:00:02 --:--:-- 20989
> mkdir: cannot create directory `/tmp/cf/boot.bak': File exists
> mv: cannot move `/tmp/cf/boot/modules' to `/tmp/cf/boot.bak/modules': Directory not empty
> mv: cannot move `/tmp/cf/boot/overlays' to `/tmp/cf/boot.bak/overlays': Directory not empty
> mv: cannot move `/tmp/cf/boot/vc' to `/tmp/cf/boot.bak/vc': Directory not empty
> umount: /tmp/cf1: not mounted
> umount: /tmp/cf: not mounted
>
> Voyage MuBox for RaspBerry Pi installed!
> root@debian-dell:/home/sbp#
>
>
> _______________________________________________
> Voyage-linux mailing list
> [hidden email]
> http://list.voyage.hk/mailman/listinfo/voyage-linux


--
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)


_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Raspberry install problems

Thomas Maxwell
Kim-man 'Punky' TSE <punkytse@...> writes:

>
> Hi Steen,
>
> Oh, the script does not support mmc device name (e.g. mmcblk0). You need
to modify the script to add "p" in
> between,
> i.e. mmcblk0p1, device and partition.
>
> Sorry on that.  And I welcome patch on this .
>
> Regards,
> Punky
>

Is the mmc patch for the script available yet?

Regards -- Tom






_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Raspberry install problems

Kim-man 'Punky' TSE-2
Hi Tom
> Is the mmc patch for the script available yet?
>
> Regards -- Tom
>
Sorry, I don't have one as I have no mmc device to test.  Indeed I encourage you to change by your own.

Regards,
Punky

--
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)


_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux
Loading...