voyage 0.9.2 installed on alix will not boot on wrap ...

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

voyage 0.9.2 installed on alix will not boot on wrap ...

Beat Meier-3
Hello

I have troube with voyage 0.9.2. I have installed alix version this will
not boot anymore on wrap boards.
I see not any significant difference on modules running on both systems
at least not that root fs is not found.
Is initfs build without ext3 support???
I get the following error:

Begin: Loading essential drivers ...
done.                                                                                                                                                                                

Begin: Running /scripts/init-premount ...
done.                                                                                                                                                                          

Begin: Mounting root file system ... Begin: Running /scripts/local-top
...
done.                                                                                                                                          

Begin: Waiting for root file system ... [   15.831619] Clocksource tsc
unstable (delta = -329063624
ns)                                                                                                                  

[   15.849287] Switching to clocksource
pit                                                                                                                                                                              




done.                                                                                                                                                                                                                    

Gave up waiting for root device.  Common
problems:                                                                                                                                                                        

 - Boot args (cat
/proc/cmdline)                                                                                                                                                                                          

   - Check rootdelay= (did the system wait long
enough?)                                                                                                                                                                  

   - Check root= (did the system wait for the right
device?)                                                                                                                                                              

 - Missing modules (cat /proc/modules; ls
/dev)                                                                                                                                                                          

ALERT!  /dev/block/8:5 does not exist.  Dropping to a shell!  

What I see is that  voyage-0.5 use hda where 0.9.2 use sda but this has
nothing todo with different platform :-(
I'm using lilo. Yes I need lilo ...

BTW: Booting voyage-0.5 and 0.9.2 with lilo no problem (both system on
cf card) while only on alix ...

Any hints?
                                                                                                             
                                         

_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux
Reply | Threaded
Open this post in threaded view
|

Re: voyage 0.9.2 installed on alix will not boot on wrap ...

Beat Meier-3
It seems that scsi driver on wrap is not loaded but why???

Here relevant message outputs...

Good case:
[    1.222581] Freeing unused kernel memory: 368k freed
[    1.224356] Write protecting the kernel text: 2912k
[    1.225174] Write protecting the kernel read-only data: 956k
Loading, please wait...
[    1.267921] udevd[900]: starting version 175
[    1.495676] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    1.533346] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management
Adapter) at 0xe0000000, 00:0d:b9:12:52:f8, IRQ 11
[    1.534754] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1,
status 0x7869 advertising 05e1 Link cde1
[    1.571688] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management
Adapter) at 0xe0040000, 00:0d:b9:12:52:f9, IRQ 15
[    1.574070] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1,
status 0x7849 advertising 05e1 Link 0000
[    1.610341] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management
Adapter) at 0xe0080000, 00:0d:b9:12:52:fa, IRQ 9
[    1.611449] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1,
status 0x7849 advertising 05e1 Link 0000
[    1.612862] usbcore: registered new interface driver usbfs
[    1.629751] scsi0 : pata_amd
[    1.632038] usbcore: registered new interface driver hub
[    1.636088] scsi1 : pata_amd
[    1.637086] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
irq 14
[    1.638004] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
irq 15
[    1.642902] usbcore: registered new device driver usb
[    1.655749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.669872] ehci-pci: EHCI PCI platform driver
[    1.674420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.697905] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[    1.711642] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned
bus number 1
[    1.730681] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xefffe000
[    1.815892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.817291] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.817964] usb usb1: Product: OHCI Host Controller
[    1.818631] usb usb1: Manufacturer: Linux 3.10.11-voyage ohci_hcd
[    1.819928] usb usb1: SerialNumber: 0000:00:0f.4
[    1.822755] ata1.00: CFA: CF 4GB, 20090819, max UDMA/100
[    1.823732] ata1.00: 7847280 sectors, multi 0: LBA
[    1.836858] ata1.00: configured for UDMA/100
[    1.838205] scsi 0:0:0:0: Direct-Access     ATA      CF 4GB          
2009 PQ: 0 ANSI: 5
[    1.840128] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01
GB/3.74 GiB)
[    1.840844] sd 0:0:0:0: [sda] Write Protect is off
[    1.843108] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[    1.851881] hub 1-0:1.0: USB hub found
[    1.876294] hub 1-0:1.0: 4 ports detected
[    1.888781] ehci-pci 0000:00:0f.5: EHCI Host Controller
[    1.890780] ehci-pci 0000:00:0f.5: new USB bus registered, assigned
bus number 2
[    1.892062]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.895041] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.904715] ehci-pci 0000:00:0f.5: irq 9, io mem 0xefffd000
[    1.923587] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00

Bad case:
[    6.350784] Freeing unused kernel memory: 368k freed
[    6.370988] Write protecting the kernel text: 2912k
[    6.386335] Write protecting the kernel read-only data: 956k
Loading, please wait...
[    6.638541] udevd[887]: starting version 175
[    7.672713] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[    7.672713]   originally by Donald Becker <[hidden email]>
[    7.672713]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[    8.219126] natsemi eth0: NatSemi DP8381[56] at 0x80000000
(0000:00:0e.0), 00:0d:b9:07:23:7c, IRQ 10, port TP.
[    8.284939] natsemi eth1: NatSemi DP8381[56] at 0x80040000
(0000:00:10.0), 00:0d:b9:07:23:7d, IRQ 11, port TP.
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... done.
Begin: Waiting for root file system ... [   15.900068] Clocksource tsc
unstable (delta = -262848077 ns)
[   15.917733] Switching to clocksource pit
done.
Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/block/8:5 does not exist.  Dropping to a shell!
[   49.028571] usbcore: registered new interface driver usbfs
[   49.032827] usbcore: registered new interface driver hub
[   49.036719] usbcore: registered new device driver usb
[   49.063157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   49.075738] ehci-pci: EHCI PCI platform driver
[   49.174166] uhci_hcd: USB Universal Host Controller Interface driver
[   49.237167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   49.314712] usbcore: registered new interface driver usbhid
[   49.315667] usbhid: USB HID core driver
(initramfs)
(initramfs)
(initramfs)


On 03/02/2015 08:33 AM, Beat Meier wrote:

> Hello
>
> I have troube with voyage 0.9.2. I have installed alix version this will
> not boot anymore on wrap boards.
> I see not any significant difference on modules running on both systems
> at least not that root fs is not found.
> Is initfs build without ext3 support???
> I get the following error:
>
> Begin: Loading essential drivers ...
> done.                                                                                                                                                                                
>
> Begin: Running /scripts/init-premount ...
> done.                                                                                                                                                                          
>
> Begin: Mounting root file system ... Begin: Running /scripts/local-top
> ...
> done.                                                                                                                                          
>
> Begin: Waiting for root file system ... [   15.831619] Clocksource tsc
> unstable (delta = -329063624
> ns)                                                                                                                  
>
> [   15.849287] Switching to clocksource
> pit                                                                                                                                                                              
>
>
>
>
> done.                                                                                                                                                                                                                    
>
> Gave up waiting for root device.  Common
> problems:                                                                                                                                                                        
>
>  - Boot args (cat
> /proc/cmdline)                                                                                                                                                                                          
>
>    - Check rootdelay= (did the system wait long
> enough?)                                                                                                                                                                  
>
>    - Check root= (did the system wait for the right
> device?)                                                                                                                                                              
>
>  - Missing modules (cat /proc/modules; ls
> /dev)                                                                                                                                                                          
>
> ALERT!  /dev/block/8:5 does not exist.  Dropping to a shell!  
>
> What I see is that  voyage-0.5 use hda where 0.9.2 use sda but this has
> nothing todo with different platform :-(
> I'm using lilo. Yes I need lilo ...
>
> BTW: Booting voyage-0.5 and 0.9.2 with lilo no problem (both system on
> cf card) while only on alix ...
>
> Any hints?
>                                                                                                              
>                                          
>
> _______________________________________________
> Voyage-linux mailing list
> [hidden email]
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>


_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux
Reply | Threaded
Open this post in threaded view
|

Re: voyage 0.9.2 installed on alix will not boot on wrap ...

Punky Tse-2
Hi Beat,

It is known problem.  The voyage kernel changed to use new PATA modules and this kernel broke on wrap.  You need to use
newer kernel (3.14.12) or older (3.8.13).

Regards,
Punky

On 3/2/2015 8:52 PM, Beat Meier wrote:

> It seems that scsi driver on wrap is not loaded but why???
>
> Here relevant message outputs...
>
> Good case:
> [    1.222581] Freeing unused kernel memory: 368k freed
> [    1.224356] Write protecting the kernel text: 2912k
> [    1.225174] Write protecting the kernel read-only data: 956k
> Loading, please wait...
> [    1.267921] udevd[900]: starting version 175
> [    1.495676] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
> [    1.533346] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management
> Adapter) at 0xe0000000, 00:0d:b9:12:52:f8, IRQ 11
> [    1.534754] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1,
> status 0x7869 advertising 05e1 Link cde1
> [    1.571688] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management
> Adapter) at 0xe0040000, 00:0d:b9:12:52:f9, IRQ 15
> [    1.574070] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1,
> status 0x7849 advertising 05e1 Link 0000
> [    1.610341] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management
> Adapter) at 0xe0080000, 00:0d:b9:12:52:fa, IRQ 9
> [    1.611449] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1,
> status 0x7849 advertising 05e1 Link 0000
> [    1.612862] usbcore: registered new interface driver usbfs
> [    1.629751] scsi0 : pata_amd
> [    1.632038] usbcore: registered new interface driver hub
> [    1.636088] scsi1 : pata_amd
> [    1.637086] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
> irq 14
> [    1.638004] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
> irq 15
> [    1.642902] usbcore: registered new device driver usb
> [    1.655749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    1.669872] ehci-pci: EHCI PCI platform driver
> [    1.674420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    1.697905] ohci_hcd 0000:00:0f.4: OHCI Host Controller
> [    1.711642] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned
> bus number 1
> [    1.730681] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xefffe000
> [    1.815892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [    1.817291] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [    1.817964] usb usb1: Product: OHCI Host Controller
> [    1.818631] usb usb1: Manufacturer: Linux 3.10.11-voyage ohci_hcd
> [    1.819928] usb usb1: SerialNumber: 0000:00:0f.4
> [    1.822755] ata1.00: CFA: CF 4GB, 20090819, max UDMA/100
> [    1.823732] ata1.00: 7847280 sectors, multi 0: LBA
> [    1.836858] ata1.00: configured for UDMA/100
> [    1.838205] scsi 0:0:0:0: Direct-Access     ATA      CF 4GB
> 2009 PQ: 0 ANSI: 5
> [    1.840128] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01
> GB/3.74 GiB)
> [    1.840844] sd 0:0:0:0: [sda] Write Protect is off
> [    1.843108] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
> enabled, doesn't support DPO or FUA
> [    1.851881] hub 1-0:1.0: USB hub found
> [    1.876294] hub 1-0:1.0: 4 ports detected
> [    1.888781] ehci-pci 0000:00:0f.5: EHCI Host Controller
> [    1.890780] ehci-pci 0000:00:0f.5: new USB bus registered, assigned
> bus number 2
> [    1.892062]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
> [    1.895041] sd 0:0:0:0: [sda] Attached SCSI disk
> [    1.904715] ehci-pci 0000:00:0f.5: irq 9, io mem 0xefffd000
> [    1.923587] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
>
> Bad case:
> [    6.350784] Freeing unused kernel memory: 368k freed
> [    6.370988] Write protecting the kernel text: 2912k
> [    6.386335] Write protecting the kernel read-only data: 956k
> Loading, please wait...
> [    6.638541] udevd[887]: starting version 175
> [    7.672713] natsemi dp8381x driver, version 2.1, Sept 11, 2006
> [    7.672713]   originally by Donald Becker <[hidden email]>
> [    7.672713]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
> [    8.219126] natsemi eth0: NatSemi DP8381[56] at 0x80000000
> (0000:00:0e.0), 00:0d:b9:07:23:7c, IRQ 10, port TP.
> [    8.284939] natsemi eth1: NatSemi DP8381[56] at 0x80040000
> (0000:00:10.0), 00:0d:b9:07:23:7d, IRQ 11, port TP.
> Begin: Loading essential drivers ... done.
> Begin: Running /scripts/init-premount ... done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-top
> ... done.
> Begin: Waiting for root file system ... [   15.900068] Clocksource tsc
> unstable (delta = -262848077 ns)
> [   15.917733] Switching to clocksource pit
> done.
> Gave up waiting for root device.  Common problems:
>   - Boot args (cat /proc/cmdline)
>     - Check rootdelay= (did the system wait long enough?)
>     - Check root= (did the system wait for the right device?)
>   - Missing modules (cat /proc/modules; ls /dev)
> ALERT!  /dev/block/8:5 does not exist.  Dropping to a shell!
> [   49.028571] usbcore: registered new interface driver usbfs
> [   49.032827] usbcore: registered new interface driver hub
> [   49.036719] usbcore: registered new device driver usb
> [   49.063157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [   49.075738] ehci-pci: EHCI PCI platform driver
> [   49.174166] uhci_hcd: USB Universal Host Controller Interface driver
> [   49.237167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [   49.314712] usbcore: registered new interface driver usbhid
> [   49.315667] usbhid: USB HID core driver
> (initramfs)
> (initramfs)
> (initramfs)
>
>
> On 03/02/2015 08:33 AM, Beat Meier wrote:
>> Hello
>>
>> I have troube with voyage 0.9.2. I have installed alix version this will
>> not boot anymore on wrap boards.
>> I see not any significant difference on modules running on both systems
>> at least not that root fs is not found.
>> Is initfs build without ext3 support???
>> I get the following error:
>>
>> Begin: Loading essential drivers ...
>> done.
>>
>> Begin: Running /scripts/init-premount ...
>> done.
>>
>> Begin: Mounting root file system ... Begin: Running /scripts/local-top
>> ...
>> done.
>>
>> Begin: Waiting for root file system ... [   15.831619] Clocksource tsc
>> unstable (delta = -329063624
>> ns)
>>
>> [   15.849287] Switching to clocksource
>> pit
>>
>>
>>
>>
>> done.
>>
>> Gave up waiting for root device.  Common
>> problems:
>>
>>   - Boot args (cat
>> /proc/cmdline)
>>
>>     - Check rootdelay= (did the system wait long
>> enough?)
>>
>>     - Check root= (did the system wait for the right
>> device?)
>>
>>   - Missing modules (cat /proc/modules; ls
>> /dev)
>>
>> ALERT!  /dev/block/8:5 does not exist.  Dropping to a shell!
>>
>> What I see is that  voyage-0.5 use hda where 0.9.2 use sda but this has
>> nothing todo with different platform :-(
>> I'm using lilo. Yes I need lilo ...
>>
>> BTW: Booting voyage-0.5 and 0.9.2 with lilo no problem (both system on
>> cf card) while only on alix ...
>>
>> Any hints?
>>                                                                                                              
>>                                          
>>
>> _______________________________________________
>> Voyage-linux mailing list
>> [hidden email]
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>
> _______________________________________________
> Voyage-linux mailing list
> [hidden email]
> http://list.voyage.hk/mailman/listinfo/voyage-linux


--
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)


_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux