wifi to ethernet

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

wifi to ethernet

tux john
Hello everyone. i have a pc engines ALIX 2d13 with 3 ethernet ports (eth0, 1, 2) and i am running voyage 0.10.0 an there is a usb stick for wifi(wlan0) on it.
up to now i had the wlan0 to be the wan interface and i got connected to a wifi network with SSID xyz and PASSWD xyz123, wpa2. the wlan0 was doing the NAT for eth0. the wifi network is 192.168.0.0/24 gw 192.168.0.1 and i was getting on wlan0 the 192.168.0.49/24. In eth0 i was having 192.168.1.1/24
current /etc/network/interfaces
allow-hotplug eth0
auto eth0
iface eth0 inet static
address 192.168.1.1
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
 
auto wlan0
allow-hotplug wlan0
iface wlan0 inet static
address 192.168.0.49
network 192.168.0.0
netmask 255.255.255.0
gateway 192.168.0.1
broadcast 192.168.1.255
 
 
and then
# echo 1 > /proc/sys/net/ipv4/ip_forward
# iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
# iptables -A FORWARD -i eth0 -j ACCEPT
# iptables -A FORWARD -i wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPT
i would like to alter the config a bit and have it connect to the same network and without any NAT involved and eth0,1,2 be in the same LAN as the wifi network 192.168.0.0/24
could someone help me please?
i have created a clean install to avoid any errors.
 

_______________________________________________
Voyage-linux mailing list
[hidden email]
http://list.voyage.hk/mailman/listinfo/voyage-linux